Tag Archives: victorian tiles

Restoring Victorian Floor Tiles in a Surrey Cafe

Posted on by

At Tile Doctor, we don’t just offer our tile cleaning and sealing services to residential properties, such as flats and houses we also cover tile installations in commercial properties, such as hotels and restaurants as well as

In fact, commercial properties tend to experience much higher daily foot traffic than residential floors resulting in much more strain on the sealer. This of course wears down the sealer more quickly and once the sealer had worn away the tiles are vulnerable to dirt becoming ingrained which makes the floor difficult to clean.

This Cafe in Chertsey is very popular with staff from the nearby hospital, as well as residents in the local area. Naturally, the cafe gets very busy and the Victorian tiled floor had experienced heavy traffic and was marked by footprints from hundreds of hungry customers.

Cafe Floor Chertsey Before Cleaning

I was called in to help the cafe owner restore this original feature back to its best possible condition and then seal again to protect it.

Cleaning a Heavily Soiled Victorian Tiled Floor

Once the cafe staff had left for the evening, I moved the tables aside to avoid damaging them and laid down a strong dilution of Tile Doctor Pro Clean across the floor. This is our reliable alkaline cleaner which is designed to loosen the dirt on tiles and grout.

As the dirt was deeply ingrained in the stone, I scrubbed the floor using an abrasive 200 grit pad fitted to on rotary buffer. Within seconds the pad had worked its magic and I had a trail of filthy water to suck up using a wet vacuum machine.

Once the majority of the floor had been cleaned, I took to my knees to closely inspect the stone for dirt. Any particularly stubborn areas were tackled using a wire brush in combination with Tile Doctor Remove and Go, which is a heavy-duty cleaner/coatings remover which works well on removing any old sealers, paints and adhesives.

Sealing a Victorian Tiled Floor

Once the floor was clean, I washed and neutralised the surface with plain water. While I was packing up for the day I also installed my air-blower to aid the drying process overnight.

Two nights later I returned to the cafe to seal the tiles with Tile Doctor Colour Grow. Colour Grow is a colour enhancing sealer that impregnates into the pores of the tile to bring out the natural colours whilst adding a durable matte finish that acts as a barrier to dirt.

Cafe Floor Chertsey After Cleaning

As you can see from the photo above, the result was fantastic. In fact, the customer loved her newly restored floor so much that she even told me to help myself to any cake of choice, I do like a bonus!
 
 
Source: Victorian Tile and Grout Cleaning Service in Surrey

Tiled Floor Restoration at 13th Century Church

Posted on by

These beautiful Quarry tiled floors belong to a 13th century church in the heart of the old village of Frankton. I did some research on the internet and discovered that the church had gone through a major restoration in 1872 so it’s most probable the tiles date back to that time.

Victorian Floor Tile Cleaning Frankton Church

Cleaning Victorian Tiles

There were multiple quarry tiled floors that were all in need of a deep clean and seal; however there was concern that cleaning the tiles using conventional cleaning methods requiring a lot of water could result in damp permeating into the structure of the building and considering the age of the building may this could cause damage. With this in mind I ran some tests to work out an alternative and I worked out that the best alternative would be to use Acid Gel which would stay in place followed by a steam clean.

Victorian Floor Tiles Frankton Church Before Cleaning Victorian Floor Tiles Frankton Church Before Cleaning

There was quite a lot of floor to cover and I need to work in relatively small sections so it took two days to complete the cleaning. I used the method I worked out earlier applying Acid Gel, and then leaving it to dwell for ten minutes before working it in with a black scrubbing pad fitted to a buffing machine. The gel and resultant soil was then removed with a wet vacuum and then the section was steam cleaned to lift out any further dirt and neutralise the acid.

Victorian Floor Tiles Frankton Church During Cleaning

Sealing Victorian floor tiles

On the third day I returned to seal the floors; there are a number of sealers I could have used for this type of floor however with the building being as old as it was I wanted to ensure the tiles could breathe and any damp could rise up through the tiles. Additionally I wanted the sealer to bring out the best in the tiles so with these points in mind I sealed the floor using four coats of Tile Doctor Seal and Go extra which covers all these points and is the recommended sealer for Victorian and Quarry tiles.

Victorian Floor Tiles Frankton Church After Sealing Victorian Floor Tiles Frankton Church After Sealing

I think you will agree the floors now look fantastic and with the sealer to protect them they should stay this way for some time to come, although give the amount of traffic these floors receive I will be working out a maintenance plan for them.
 
 
Source: Church Floor Restoration Service in Warwickshire

Restoring Old Victorian Tiles at a Public House

Posted on by

Here’s a really interesting commercial job for you, which I recently completed in the town of Hinckley, Leicestershire. I was asked to take a look at a Victorian Geometric and Encaustic tiled floor in the historic Queen’s Head pub.

This floor is over a century old and although in good condition for its age had suffered significant wear over the years, along with some cracked tiles and slight inherent moisture issues. What the pub landlord requested was a restorative clean to alleviate the aesthetically damaging effect of the wear, and to enhance the natural colours of the stone. I was also asked to seal the floor following the clean to achieve a semi-gloss finish.

Victorian Tiled Public House Floor Before Cleaning in Hinckley

Cleaning an old Victorian tiled floor

The first step in the cleaning process was to mix a strong solution of one part Tile Doctor Pro-Clean to four parts clean water. Pro-Clean is a high alkaline cleaner which also contains stripping properties, allowing it to break down old sealer and tackle heavy soil build-up. The solution was applied to the floor and left to dwell for 15 minutes, giving it times to seep into the stone, get underneath the dirt and lift it to the surface.

I addressed several paint spots and areas suffering from glue contamination by using Tile Doctor Remove & Go, which is specially formulated to break down paint and adhesives on unpolished natural stone floors, amongst others. The entire floor was then scrubbed using a special floor cleaning pad, and the resulting slurry was vacuumed away using a wet-vac machine.

The final issue to deal with was the inherent efflorescence staining. This was treated using Tile Doctor Grout Clean-Up, an acid-based product which removes not just efflorescence but also grout haze, mineral deposits, and rust stains. The solution here was one part Grout Clean-Up diluted with four parts water.

After completing the clean, I thoroughly rinsed the floor with clean water to remove any trace of cleaning product and dried the floor as much as possible with a wet vacuum, then before leaving for the day i installed a couple of air movers to assist with drying overnight.

Sealing an old Victorian tiled floor

Upon my return the following day, I checked the floor for any excess moisture before sealing it with our topical, semi-gloss finish sealer, known as Seal & Go Extra which due to its formula is ideal for external or old internal floors where there is unlikely to be damp from membrane.

This unique product provides excellent protection, and allows the tiles to breath where floors are suffering from inherent moisture issues. It is suitable for both internal and external use, on Victorian floor tiles, Sandstone, Flagstones, Terracotta, and rough Slate.

Victorian Tiled Public House Floor After Cleaning in Hinckley

As you can see from the photo, I was able to fulfil my client’s request to a high standard, bringing the pub’s old yet characterful Victorian tiled floor back to life again.
 
 
Source: Victorian Tile, Restoration, cleaning and sealing service in Leicestershire

Cleaning A Victorian Floor At Brighton Offices

Posted on by

Recently, I was asked to do some Tile Doctoring at Palmeira Square, in the seaside city of Brighton and Hove, to restore the Victorian tiled floor of one of the downstairs offices. Palmeira Square is a residential area which was first developed in the mid-19th century during the reign of Queen Victoria, so many of the buildings feature some fantastic original Victorian tile floors. Although there are many large terraced houses and even mansions in the area, some of the buildings have been converted into offices for commercial use. My client, who leased the downstairs office, managed to persuade the other tenants to employ professional help to restore the tiles, and so I was asked to come in to clean and seal the floor to get it back to looking its best.

Victorian Tiled Office Floor Brighton Before Cleaning

Cleaning a Victorian tile floor

With Palmeira Square being quite a lively area, I made sure to fence off the front door area from the wandering public. My first job was to apply Tile Doctor Remove & Go to the floor, a heavy duty stripper, multi-purpose stripper that was able to remove the stubborn marks, stains and ingrained dirt on and between the tiles. In particular, Remove & Go helped to remove some rust stains I found near the door hinges.

Victorian Tiled Office Floor Brighton Before Cleaning

I left the product to sit and work its magic for twenty minutes, and during this time I began cleaning the floor using a buffing pad, which is suitable for use on all types of floor (except polished stone), and a solution of Tile Doctor Pro-Clean diluted with water. The combination of a buffing pad and Pro-Clean helped to remove the general dirt and grime that had built up over time in this high traffic area of the office. After the cleaning was complete, the black tiles appeared grey because any remaining sealer had been removed. However, the colour would return after resealing the tiles, which was my next job.

Victorian Tiled Office Floor Brighton After Cleaning

Sealing a Victorian tile floor

I returned to the office after two days to seal the Victorian tile floor. To do this, I needed to use Tile Doctor Seal & Go, which meant I had to ask the office workers to keep off the floor for most of the day. This is because I needed to apply six coats of Seal & Go to the floor, and each coat takes roughly fourty minutes to dry. Seal & Go provides a stain-resistant surface seal and a durable low-sheen finish, which will help keep this floor looking great for a long time, even with a high traffic of workers coming in and out of the office.

Victorian Tiled Office Floor Brighton After Cleaning

Luckily, it was a warm day outside, and the floor dried quickly, leaving a shiny, deep black surface. Both my client and I were very happy with the result. The client was also pleasantly surprised to see that I had been able to remove the rust stains near the door.
 
 
Source: Professional Tile, Stone and Grout Restoration service in East Sussex

Victorian Hallway at Grade 2 Listed Salford Town Hall Remodelling

Posted on by

This original Victorian Tiled floor was uncovered at the Grade 2 listed Salford Town Hall in Salford, Manchester. This public building which built around 1827 was the former Salford Town Hall and Magistrates Court; it’s currently being turned in to luxury apartments and this amazing floor is located in the main entrance hall. The floor was only recently re-discovered during the conversion works after being hidden for many years and was in surprisingly good condition. The company remodelling the building are maintaining the historic features so we got the call to go in and clean and seal the floor.

Victorian Tiles at Salford Town hall before

Cleaning Victorian Tiles

Cleaning the floor was fairly straight forward and involved the application of a dilution of Tile Doctor Pro-Clean which was left to dwell on the tile for around ten minutes before being worked into the Tile and Grout using a rotary machine fitted with a black pad. The dirty solution was removed using a wet vacuum and the whole floor rinsed down three times to ensure there was no trace of cleaner left on the floor. It’s a large tiled area so it took the whole day to complete.

Sealing Victorian Tiles

I returned the next day to see that the floor had dried off overnight and so started to seal it using Tile Doctor Seal & Go which is a topical sealer that adds a nice shine to the tiles, five coats of sealer were needed before the tiles were fully sealed. I think you would agree the floor now looks fantastic; certainly the client was happy with the finish.

Victorian Tiles at Salford Town hall after

 
 
Source: Commercial Tile, Stone and Grout Cleaning in Greater Manchester