Night Cleaning Ceramic Supermarket Tiles

Photographs below from a Mini-Market in Lewes where high foot traffic was taking its toll on the Ceramic tiled floor which was now is need a dramatic deep clean.

Before Cleaning Dirty Ceramic Tiles in Lewes Mini Market

Shop Floor Cleaning

As the shop is open from 6am-11pm I had to work through the night. I started by applying a medium dilution of Tile Doctor Pro-Clean to shift the muck, this was left to soak in for a while before being scrubbed into the floor using a buffing machine fitted with a scrubbing pad and stiff brush along the grout lines. The floor was then rinsed with warm water which was then extracted using a wet vacuum. I had to repeat the process in stubborn areas but as you can see from the pictures the result was incredible, just look at the pictures!

Cleaning Dirty Ceramic Tiles in Lewes Mini Market

Ceramic tiles are glazed so do not need sealing and as there is no sealer the floor can now be maintain using a regular floor cleaning product. Hopefully they can keep on top of the cleaning however it is a busy floor with hundreds of people walking on it every day so if they do struggle we are always happy to do a regular maintenance clean for them.

After Cleaning Dirty Ceramic Tiles in Lewes Mini Market

 
 
Source: Professional Tile, Stone and Grout cleaning service in East Sussex

Slate Floor Builders Clean at Scottish Business Park

The photographs on this page are of a natural Rough Slate tiled floor installed in the ground floor and stairs of the Touch Business Centre in Stirling where recent building renovation works had left the floor covered in dirt and plaster dust which they couldn’t remove. The owner of the business centre now needed the floor renovating prior to renting out the units to new tenants.

Dating from around 1750 the business units had been converted within the stable block of a large house; now a listed building they would originally have been used for horses and carriages before becoming a milking parlour, estate workshops and garages. The conversion was supported by Historic Scotland and had to retain the feel and features of an historic building and the slate floor was an important part of this.

Natural Rough Slate Tiled Floor Touch Estate Before Cleaning

Cleaning Slate Floor Tile and Grout

To remove the dirt and plaster we used a dilution of Tile Doctor Remove and Go which is a strong coatings remover that’s safe to use on natural stone but also very effective. It was mopped onto the tile and left for around twenty minutes to allow it to soak into the pores of the tile and get to work and break down and soften any remaining sealer and plaster etc. This was then scrubbed into the tiles using a black pad fitted to a rotary machine running on a slow speed; the resultant soiled cleaning solution was then extracted using a wet vacuum, the floor rinsed and the process repeated until we were satisfied the floor was completely clean.

Natural Rough Slate Tiled Stairs Touch Estate During Sealing Natural Rough Slate Tiled Stairs Touch Estate During Sealing

Sealing Slate Floor Tiles

After allowing the floor sufficient time to dry we returned on-site to seal the slate tile and protect it from stains etc checking first with a damp meter that the tiles were indeed dry. To seal the floor we used five coats of Tile Doctor Seal and Go which is a water based sealer (no smell) which adds a nice sheen to the tile and gave the desired finish.

Natural Rough Slate Tiled Floor Touch Estate After Cleaning and Sealing

 
 
Source: Professional Tile, Stone and Grout maintenance service in Glasgow

Restoring old Church floor tiles

The photographs below are from the Lyle Kirk Church of Scotland in Greenock where we asked to clean the Quarry tiles in the main entrance of the church. As you can imagine the floor is very busy and is constantly in use from parishioners and had now become very unappealing from ingrained dirt and was proving impossible to clean effectively.

Lyle Kirk Church Quarry Tiles Before Cleaning Greenock Lyle Kirk Church Quarry Tiles Before Cleaning Greenock

Cleaning Old Quarry Tiles

With such an old floor we had to take a lot of care and so using a buffer machine to speed up the process was out of the question. As a result so we cleaned the whole tiled floor including the grout by hand using various strength dilutions of Tile Doctor Remove and Go and then Pro-Clean to remove the years of wax and coatings from the tiles, both products I should mention are safe to use on tile, stone and grout. It was arduous and slow work taking us four days to complete and the floor was given a thorough wash down once clean to remove any trace of cleaning product before sealing.

Dealing with Efflorescence

Whilst cleaning the floor we noticed some signs of efflorescence which is where salts from the ground below evaporate up through the pores in the tile and leave white deposits on the surface of the tile above. The efflorescence was removed easily using Tile Doctor Grout Clean-Up but it alerted us to the fact that normally old floors were traditionally laid directly on compacted earth with no damp proof course and that damp could be an issue that could affect the sealer.

Lyle Kirk Church Greenock

Sealing an old Quarry Tiled Floor

We left the floor to dry off and when we returned being cognizant of the damp issue we chose Tile Doctor Seal and Go Extra to seal the floor, this a new sealing product which is highly breathable and ideal for sealing external tiles or internal tiles where there is a damp problem. Four coats were sufficient and once done the floor looked completely transformed.

Lyle Kirk Church Quarry Tiles After Cleaning Greenock Lyle Kirk Church Quarry Tiles After Cleaning Greenock

 
 
Source: Professional Tile, Stone and Grout restoration service in Glasgow

Removing Limescale from Stone Bathroom Worktops at a Business Park

This job required the cleaning of Marble Worktops in twelve toilets at a very nice office in the Abingdon Science Park. The building was occupied by a company called Sophos who you may have heard of and over a period of time the Marble had become stained through the build-up of Limescale from the water supply and the cleaning company servicing the office could not clean it off. I’ve seen a few horror stories of stone surfaces being damaged through the use of acidic Limescale removers so the cleaning company was quite right not to touch it.

Marble Bathroom Worktop Abingdon Before

Polishing Marble Worktops

To remove the Limescale it would be necessary to hone the Marble using a set of small six inch burnishing pads fitted to a handheld buffing machine. The process involves starting with the coarse 400grit pad with a little water which cuts through the Limescale and then moving on to the 800, 1500 and finishing with 3000 grit to hone the surface and build the polish backup. The water helps lubricate the activity and the surface needs to be rinsed down between each pad.

Sealing Marble Worktops

When the surface was dry I applied two coats of Tile Doctor Colour Grow which is a colour enhancing sealer which impregnates the pores of the stone to protect it, it also enhances the natural colours in the stone.

There were twelve of these to do so as you can imagine it took me a while to get round.

Marble Bathroom Worktop Abingdon After

If you are experiencing a similar problem with highly polished Marble do get in touch as we can achieve a mirror finish.
 
 
Source: Commercial Tile, Stone and Grout maintenance service in Oxfordshire

End of Tenancy Cleaning a Victorian Tiled floor

We were asked to restore a beautiful geometric Victorian tiled floor. The property had been used as a letting house and the floor had been used and abused for many years, just given an occasional mop over from time to time.

Victorian Tile Before Cleaning Leighton Buzzard Victorian Tile Before Cleaning Leighton Buzzard

The new owners wanted to revive the colours and deal with the neglect. Step one was to put down the tile doctor pro clean alkaline cleaning solution and to let it dwell for a period of around twenty minutes.

We gave the solution plenty of dwell time before setting up our low speed rotary machine, underneath it we used a black pad to agitate and help loosen the ingrained dirt.

Once completed we set up our powerful rinsing tool which is attached to a machine fixed into our van, by doing this we do not need to dispose of any dirty water on your property but instead we take it away with us and dispose of it in the proper manner in an appropriate disposal point.

After rinsing the floor came up very well but we still felt it could be better, we used a steamer coupled with HBU Nanotech and a scraper to remove various deposits of paint and other sticky residue which had set over time.

After thoroughly rinsing the floor again we left the floor to dry for 4 days, Victorian tiles along with other earth based tiles are very absorbent and need to dry thoroughly and fully.

Victorian Tile After Cleaning and sealing Leighton Buzzard Victorian Tile After Cleaning and sealing Leighton Buzzard

On our return we tested for damp ensuring the floor was dry enough to seal.

To seal the floor we used two coats of colour grow impregnating sealer, once the sealer had dried we then began sealing the floor using seal and go.

After applying several thin coats of seal and go, the floor reached the desired appearance.

A combination of Pro clean, hbu nanotech, colour grow and seal and go with a little bit of care from your local tile doctor restored this old uncared for floor back to the prime of its life.
 
 
Source: Professional Tile, Stone and Grout maintenance service in Bedfordshire

Refinishing 145m2 Polished Limestone Reception Area

We were engaged by a commercial maintenance contractor to clean the large Limestone reception floor area of a very prestigious office building in the centre of Cardiff. The office’s main tenant is a bank and the owners were keen to restore the floor as they were letting out the remaining office space and keen to show off its potential to other businesses. The Limestone floor had been laid in 2009 and naturally being a reception area had seen a lot of foot traffic and the standard cleaning process was struggling to keep pace with the ingrained dirt and would now need to be burnished with diamond encrusted pads to remove the ingrained dirt and bring back the polish.

Polished Limestone Central Cardiff Offices

Restoring Polished Limestone

First went over the area with a very course black burnishing pad fitted to a rotary cleaning machine and a little water to remove the worst dirt and cleaned the grout lines with Tile Doctor Pro Clean in the process with a stiff grout brush. For stubborn areas I mixed in a little Tile Doctor Nanotech HBU which deals with the heavy build-up of dirt, rinsing and extracting the soil with a wet vacuum as I worked.

Polished Limestone Central Cardiff Offices

Once the main ingrained dirt was lifted I moved onto the a medium burnishing pad which is the first step in restoring the surface back to its normal appearance; this was followed with the next pad in the sequence all the time lubricating with water as you go. The floor was then given a thorough rinse to remove any soil created by the processes and left to dry overnight.

Polished Limestone Central Cardiff Offices

The next day the floor was given a final polish with the last burnishing pad which is super fine and then it was sealed including the grout lines with a couple of coats of Tile Doctor Colour Grow which impregnates the stone to prevent contaminates becoming ingrained into the tile, it also enhances the natural colours in the stone. Last step was a final run over with a buffing pad to ensure any blemishes were removed.
 
 
Source: Commercial Limestone floor maintenance in Cardiff

Assisting Cleaning Companies To Resolve Tricky Problems

This call actually came from a cleaning company where one of their cleaners had been to a customer in the village of West Hanney near Wantage and tried to clean the walls of this Limestone Shower using a supermarket Limescale remover, which as you can see from the photograph below didn’t work out very well.

I should point out that Limescale removers contain some strong acids which should never be used on stone or sealed surfaces as the acid will etch the surface. Even weak acid cleaners used over time will have an effect so do take care and always read the label.

Damaged Limestone Shower Wall West Hanney Before

Resurfacing Limestone Shower Tiles

To restore the surface I realised it would need to be treated like a polished stone floor and burnished. So with this in mind I started burning the tiles with a little water and a coarse 6 inch diamond burnishing pad fitted to a hand held rotary machine before moving onto a medium pad. Normally to bring up the polish you would move onto the fine and super-fine pads but it was evident that the other shower walls had a matt finish so there was no need.

Sealing Limestone Shower Tiles

I waited for the Limestone tiles to dry and applied two coats of Tile Doctor Ultra Seal which is a penetrating sealer that will protect the stone from staining.

Damaged Limestone Shower Wall West Hanney After

The owners of the house were very pleased that the wall was not ruined and the cleaning company relieved that the problem had been resolved.
 
 
Source: Professional UK wide maintenance service for Tile, Stone and Grout

Deep Cleaning a Communal Hallway Floor in Apartment Block

This Polished Limestone floor had been laid in the communal hallway of a block of flats in Aston Clinton and as you can see from the photograph below the stone had become ingrained with dirt over time and was now overdue for a deep clean and polish. Apologies for sounding like a dentist and also the photographs as the lighting wasn’t brilliant in the corridor.

Polished Limestone before cleaning in Aston Clinton

Cleaning Limestone Tile and Grout

Due to the heavy soling of the stone and grout lines we started by applying a strong dilution of Tile Doctor Pro-Clean which is an alkaline cleaning product that’s safe to use on Stone and Grout. The solution was scrubbed into the floor using a commercial rotary machine fitted with a fitted poly brush; once the cleaning solution had become dirty the floor was rinsed with water and the process re-applied until the stone and grout were clean.

Polishing Limestone Floor Tile

Our next task was to re-build the polish on the stone using a set of Tile Doctor Diamond encrusted burnishing pads which are applied to the tile in sequence from Coarse to fine further cleaning and polishing the stone until its returned to its original condition. The pads come in a set of four and you start with the coarse pad together with a little water. This this cuts through and removes surface grime, dirt and any remaining sealer. The floor is then rinsed and you move on through the remaining pads until the polish has been restored to the tiles. This process took up much of the first day so the floor was given a final rinse and left to dry overnight.

Sealing Limestone Tiles

On the second day we returned to find the tiles had dried and we started to seal the Limestone using three coats of Tile Doctor Colour Grow which is a colour intensifying sealer that soaks into the pores of the stone bringing out the natural colours whilst providing that all important lasting protection.

Polished Limestone after cleaning in Aston Clinton

 
 
Source: Tile, Stone and Grout Maintenance and Restoration in South-Buckinghamshire

Maintaining Yorkstone Slabs in a Solicitors Office

The pictures below are from a York Stone flagged hallway floor in an old building in the historic and picturesque market town of Newark, Nottinghamshire. The building dates back to the late 17th Century so the flagstone were likely to be very old, additionally the building is now the busy offices of local solicitor and so does get a lot of wear. The flagstones had a heavy build-up of soiling and old worn down coatings, there was also evidence of remove paint spots and I suspect adhesive residues suggesting at some point the floor had been covered in a carpet.

York Stone Flagstone Hallway Floor Before Cleaning in Newark

Cleaning Old Flagstones

The first step was to remove any previous coating such as sealers so a strong dilution of Tile Doctor Pro-Clean was applied and left to soak into the stone for twenty minutes. Pro-Clean is a multi-purpose heavy duty cleaner & coating remover that due to its alkaline formula is safe to use of Tile, Stone and Grout. The cleaning solution was scrubbed by hand into the wall edges and corners and paint spots and adhesive contamination marks were spot treated whilst the solution on the main part of the floor was getting to work breaking down the years of soiling. Once the edges were done it was time to agitate the flagstones on the main part of the floor with a weighted low-speed rotary machine fitted with a special restoration brush.

After thoroughly scrubbing the floor, the resulting slurry was vacuumed away and stubborn areas re-treated. The floor was then given a further rinse and the floor then left to dry off overnight.

Sealing York Stone Flags

The following day I returned to seal the floor. As the property dates back to the 17th Century it’s unlikely the floor has a damp proof membrane installed so it would be important to choose a breathable sealer that will allow moisture to pass up through the stone. We chose Tile Doctor Colour Grow for the job, it’s a breathable impregnating sealer that occupies the pores in the stone preventing contaminates from staining the floor and also enhance the natural colours in the stone. The flagstones were quite porous so three coats were required to ensure complete protection.

York Stone Flagstone Hallway Floor After Cleaning in Newark York Stone Flagstone Hallway Floor After Cleaning in Newark

I think you will agree from the photographs that flagstones have been transformed and the Colour Grow sealer will provide a durable barrier to both water & oil based spills. Tracked in soiling is also easier to remove when damp mop cleaning for which I recommended the use of Tile Doctor Neutral Cleaner which unlike acidic cleaners will not impair the integrity of the sealer.
 
 
Source: Tile, Stone and Grout Renovation in Nottinghamshire

Regular Maintenance of Restaurant Tiles

I was asked by my local Indian restaurant in South Croydon if I could improve the look of their marble tiles in the reception area of the restaurant. They had been laid several years ago and now the sealer was failing and dirt was becoming ingrained in the tile and especially the grout which had gone dark.

Marble Tiles Indian Restaurant South Croydon Before Marble Tiles Indian Restaurant South Croydon Before

Marble Tile and Grout Cleaning

To get the grout clean and remove the surface dirt we started with the application of a coarse grade diamond encrusted burnishing pad, the pad is used in conjunction with a little water which helps lubricate the process and it effectively cuts back the layer of grime from the surface. Rotary pads do struggle to reach into the grout lines so a medium dilution of Tile Doctor Pro-Clean which is a heavy duty tile and grout cleaner that’s safe to use on natural stone and grout was also scrubbed into the grout by hand using a stiff brush.

Marble Tiles Indian Restaurant South Croydon During Cleaning Marble Tiles Indian Restaurant South Croydon During Cleaning

The floor was then rinsed to remove the now dirty water and cleaning solution and we moved on to polishing the floor using a medium grade, fine and then super fine pads to build the surface shine backup. The floor was rinsed with water in-between each pad and then dried out as thoroughly as possible using large air movers.

Sealing Marble Floor Tiles

Normally I would have finished off with the application of Tile Doctor Shine Powder to give it a mirror like finish but the owner was happy with the way it looked and so once the floor had dried we moved onto sealing it with two coats of Tile Doctor Colour Grow which is an impregnating sealer that works from the inside by occupying the pores within the stone, it also enhance the colours within natural stone.

Marble Tiles Indian Restaurant South Croydon After Cleaning Marble Tiles Indian Restaurant South Croydon After Cleaning

The owner was over the moon with the results and has now engaged us to maintain the floor on a regular basis.

Marble Tiles Indian Restaurant South Croydon Before and After Marble Tiles Indian Restaurant South Croydon Before and After

 
 
Source: Tile, Stone and Grout Maintenance services in East-Surrey

Cleaning Anti-Slip Pool Tiles

The photographs below were taken at a privately owned swimming pool in the historic village of Naseby an area famous for the civil war battle that tool place there in 1645. The pool was surrounded by Anti-Slip safety tiles which have a roughened texture to improve traction around the water’s edge, this does have the side effect however that they trap dirt more easily. The tiles were overdue a deep clean and had become very dirty and additionally there were rust marks from metal furniture and blackish grout lines.

Rust Stains on Swimming Pool Tile Cleaning Naseby

Cleaning Pool Tiles and Removing Rust Stains

Working one area at a time and taking care not to contaminate the swimming pool a dilution of Tile Doctor Pro-Clean was applied to the tiles and then worked into the tile, especially the rust stains before being washed off using a Rotovac machine which applies hot water at high pressure and then removes it to a remove tank using suction. It’s an ideal machine for this sort of job as it’s very self-contained.

Stubborn areas were treated with Tile Doctor Remove and Go which is a powerful product designed to deal with sealers and other surface coatings. Once done another rinse with the Rotovac ensured the soiled cleaning solution and any trace of cleaning product is removed from the surface.

Rust Stains on Swimming Pool Tile Cleaning Naseby

Sealing Ant-Slip Porcelain tiles

Once the tile and grout was clean it was left to dry so it could be sealed which will prevent the tile and grout becoming dirty so quickly. For this we used Tile Doctor Pro-Seal which is a no-sheen, natural look, water based penetrating sealer.

Swimming Pool Tile Cleaning Naseby

It makes a significant difference if you have the right tools for the job and this resulted in the tiles looking as good as new in no time.
 
 
Source: Tile, Stone and Grout Problems resolved in Northamptonshire

Removing Limescale from Swimming Pool Tiles

The owner of this swimming pool at a large residence in the suburban village of Oxshott had put the property on the market and naturally wanted the pool area to look its best. The pool was surrounded by Porcelain tiles which are very resilient and generally a good choice for a swimming pool surround, additionally the slate effect tiles in this post had a riven surface which would make them less slippery than the highly polished variety. The chemicals used in swimming pools however are quite strong and I suspect this has contributed to the build-up of Limescale on the surface of the tiles.

Cleaning Porcelain Tiles

The first job was to give the tiles a deep clean and this was done by scrubbing in Tile Doctor Pro-Clean diluted 1 part cleaner to four parts hot water using a black scrubbing pad fitted to a rotary machine. Once scrubbed the soiled cleaning solution was removed using a wet vacuum and the tiles given a thorough rinse. There were a lot of tiles to clean and naturally care has to be taken to avoid getting any cleaning solution in the pool.

Porcelain Pool Surround Oxshott Before Cleaning Porcelain Pool Surround Oxshott Before Cleaning

After rinsing the tiles were dried with the assistance of an air mover so we could get an idea of what other remedial work would be required and in this case it became clear where the areas with Limescale staining were.

Porcelain Pool Surround Oxshott During Cleaning

Removing Limescale from Porcelain Tiles

To remove the Limescale each stain was spot treated using Tile Doctor Grout Clean-up which is a strong acid based cleaning product normally used to remove grout smears from tiles but also equally useful at dealing with mineral deposits such as Limescale. You have to be very careful with acids on tiles, especially natural stone so once it had done its job the tiles were thoroughly rinsed and the whole floor rinsed again once we have completed everything.

Porcelain Pool Surround Oxshott After Cleaning Porcelain Pool Surround Oxshott After Cleaning

When we had finished the client couldn’t believe the transformation we have managed to achieve.

Porcelain Pool Surround Oxshott Before And After
Source: Tile, Stone and Grout Problems Resolved in Surrey

Granite Floor Builders Clean

Granite is as you would imagine a very hard surface that looks beautiful when polished; in this case however it the floor had been abused by workmen who had been working at this commercial premises in the market town of Fareham and trailed all sorts of building materials and dirt onto the floor during renovation work. The once beautiful Granite floor tiles were now looking in a sorry state and the site manager was keen to have them restored to their former glory.

Polished Granite Floor Before Cleaning Fareham

Cleaning Marble Floor Tiles

The floor a quick sweep and wash down with a dilution of Tile Doctor Pro-Clean partly to ensure any surface grit etc. was removed but also so we could get a stiff grout brush in along the grout lines and give them a clean. Next the floor was rinsed down with water which was removed with a wet vacuum. The next step was to burnish the Granite with a set of four diamond encrusted burnishing pads which come in different grits and are applied in sequence working from coarse which removes old sealers and dirt through to medium, fine and super fine pads which build up the polish on the floor. The floor needs a rinse with water in-between each pad to remove any slurry and water is extracted from the floor using the wet vacuum, after the super fine pad we removed as much water from the floor as possible and left it to dry overnight ready for sealing the next day.

Sealing Marble Floor Tiles

Being a commercial floor I was concerned about the foot traffic wearing down the polish on the tiles so Tile Doctor Shine Powder was sprinkled onto the Granite and ground in using a little water to help lubricate the process and another pad at slow speed. Once this was complete the floor was buffed using a white buffing pad and now it looks transformed.

Polished Granite Floor After Cleaning and Polishing Fareham

 
 
Source: Tile, Stone and Grout Maintenance Service in Hampshire

Restoring Office Quarry Tiles

A company based in the 17th century market town of Watlington were renovating their office space and decided to replace the carpet which had been glued to the floor below. Upon further inspection this turned out to be a Quarry Tiled Floor and they were keen to restore it and so we got the call.

Quarry Tiles Before Cleaning in Watlington

Restoring Quarry Tiles

I first covered the whole floor with Tile Doctor Remove and Go, leaving this to dwell for a while whilst I fitted a scrubbing pad to my rotary machine. Once the machine was ready the whole floor was scrubbed followed by a rinse with water; the resultant soil was then extracted from the floor using a wet vacuum. This process removed most of the glue so I repeated the process until satisfied all the glue had gone. Remove and Go lives up to its name and although normally used to remove sealers it will remove most other coatings as well. This process took up most of the day so after the final and thorough rinse I left the floor to dry aiming to come back the next day to seal it.

When I returned the next day the floor had white patches of effervescence on it where salts had been forced up through the tile as the water evaporated; this had to be dealt with before the tiles could be sealed so I spent the second day scrubbing the entire floor with Grout Clean Up to remove it, after finishing the floor was given another thorough rinse to remove any product from the floor and used the wet vacuum again to get it as dry as possible.

Sealing a Quarry Tiled floor

I returned the third day to a nice dry and most importantly clean floor. To seal Quarry tiles I usually go for Tile Doctor Seal and Go as it’s water based (so no smell) and it adds a nice shine to the floor; however in this case being an office environment with a lot of heavy traffic I decided to go with Tile Doctor Colour Grow which is an impregnating sealer that soaks into the pores of the tile and is likely to be more durable, it also enhances the natural colours in the tile leading to a very nice finish.

Quarry Tiles After Cleaning in Watlington

I think you will agree the final result was a remarkable transformation
 
 
Source: Office Tiled Floor Restoration in Oxfordshire

Slate Floor Restored at new Yoga Studio

This Slate tiled floor is in a barn in Beckley, near Rye, Hawkhurst, Tenterden and Robertsbridge. For years it had been used to store furniture, gardening equipment and worryingly, a leaky motorbike which had stained the slate.

Slate Floor in Beckley Barn Before Oil Staining
You can see from the photographs below that the Slate tiles were much worn, stained, faded and far from looking their best.

Slate Floor in Beckley Barn Before Slate Floor in Beckley Barn Before

Deep Cleaning Slate Tiled Floor

Firstly I swept out the whole area then applied Tile Doctor Remove and Go to several areas where engine oil had leaked. After leaving it to soak in for fifteen minutes I began to strip and clean the floor with Tile Doctor Pro-clean worked in with a buffer machine fitted with a black scrubbing pad. However it became apparent that some of the ridges on the slate were damaging the black pad so the remainder had to be done by hand with a deck brush. Once the stone was stripped and cleaned the appearance was even greyer than before. I assured the customer that once the sealer has been applied it would be transformed to a much darker colour.

Sealing Black Slate Floor Tiles

After two days drying I returned to seal the floor checking first to ensure it was dry and no further work was required which is just as well as I had to wipe away what appeared to be stray dog paw prints. I got to work applying Tile Doctor Ultra Seal having previously estimated that four coats would sufficient to give it a dark finish; I should mention that Ultra Seal was chosen due to the fact that it’s provides a no-sheen natural look appearance.

Frustratingly it was quite a cold barn with little ventilation despite it being an unseasonably warm autumn day outside and this increased drying times. However by about four o’clock in the afternoon the job was finished and looking remarkably transformed. The customer was pleased with the improvement and is now moving forward with to fit out the barn as a yoga studio.

Slate Floor in Beckley Barn After Slate Floor in Beckley Barn After

Source: Tile, Stone and Grout Cleaning in Sussex

Cleaning and Sealing 120m2 of Slate Tiles at an Enterprise Centre

These photographs are taken at an Enterprise Centre in Millom where local business are encouraged to network and they also offer various training courses, all of which results in a large amount of people coming and going across the 120m2 of rough black Slate which covers the communal areas. Interestingly enough this is not the first time we have cleaned and sealed this floor with the last visit being five years ago. Five years of wear and tear had taken its toll on the tiles though and the black Slate was looking tired but not horrendous given its location so I think it’s fair to say the sealer had performed well over the Intermitting period.

Rough Black Slate Millom Before Cleaning

Cleaning Rough Black Slate

As I mentioned before the area in total was about 120m2 which is a large area so we operated in sections working around the public and ensuring the correct signage was displayed were relevant.

To clean the Slate tile and grout and remove the remaining sealer the floor a good deep clean using a dilution of Tile Doctor Remove and Go leaving it to soak in for fifteen minutes before working it in with a black scrubbing pad fitted to a rotary buffing machine. This process was followed by rinsing and cleaning with fresh water, stubborn areas were retreated and the water was removed using a wet vacuum to the get the floor as dry as possible.

Sealing Rough Black Slate

Once the section of floor was clean we left it to dry and moved onto cleaning the next section coming back later to seal it which we did with two coats of Tile Doctor Colour Grow which is an impregnating sealer that occupies the pores preventing contaminates from becoming ingrained. Colour Grow is also a colour enhancing sealer that brings out the deep colour in the slate.

Rough Black Slate Millom After Cleaning

The customer knew about using the right cleaning solution for regular cleaning however as it had been five years since our last visit we thought it best to remind them and recommend the use of Tile Doctor Neutral Cleaner which will not reduce the life of the sealer like an acidic cleaning product would.
 
 
Source: Commercial Tile and Stone Cleaning and Sealing in Lancashire

Applying Anti-Slip to a Golf Course Changing Rooms

I recently paid a visit to a Golf Club in Derbyshire to assist local Tile Doctor Steve Carpenter with the application of Anti-Slip treatment to the 6inch porcelain tiles in the men’s changing rooms. This is the advantage of being a member of a large network, if a fellow member needs assistance on a time consuming job they can just ask for assistance. In this case the floor was only around 12m2 but the Golf Club were hosting a Tournament later that afternoon and needed the work completing before 1pm.

Anti-Slip Preparation Derbyshire Golf Course

Cleaning Porcelain Tiles ready for Anti-Slip treatment

For best results the Anti-Slip treatment requires a clean surface so the first job was to give the tiles a thorough wash using Tile Doctor Pro-Clean worked into the floor with a rotary machine fitted with a scrubbing pad. The resultant dirty cleaning solution was then removed using a wet vacuum and the floor rinsed with clean water.

Applying Anti-Slip treatment to Porcelain tiles

The next step was to apply the Priming and Locking solution to the tile surface diluted one part solution to four parts water and this was left to dry. Once dry we applied the Anti-Slip treatment ensuring the tile was kept wet for up to 20 minutes in the process. The last step in the treatment was to re-apply the diluted Priming and Locking solution before the floor fully dried, it’s this last step that activates the treatment and locks it in place. There’s no need to wait for the floor to dry at this point it can be used immediately after the last step has been applied.

Anti-Slip Treatment Derbyshire Golf Course

To test the floor I invited the manager to try the floor dry and wet so he could experience the improvement in surface friction on a wet surface for himself. The treatment worked well and the manager was impressed, not only that we managed to complete the job with 45 minutes to spare.

For after care we recommend the floor should be cleaned daily by damp mopping with our Neutral Tile Cleaner, diluted at 35ml per 5-Litres of water periodically scrubbing the floor with a deck brush.
 
 
Source: Residential and Commercial Tile, Stone and Grout Cleaning in Lancashire

Victorian Hallway at Grade 2 Listed Salford Town Hall Remodelling

This original Victorian Tiled floor was uncovered at the Grade 2 listed Salford Town Hall in Salford, Manchester. This public building which built around 1827 was the former Salford Town Hall and Magistrates Court; it’s currently being turned in to luxury apartments and this amazing floor is located in the main entrance hall. The floor was only recently re-discovered during the conversion works after being hidden for many years and was in surprisingly good condition. The company remodelling the building are maintaining the historic features so we got the call to go in and clean and seal the floor.

Victorian Tiles at Salford Town hall before

Cleaning Victorian Tiles

Cleaning the floor was fairly straight forward and involved the application of a dilution of Tile Doctor Pro-Clean which was left to dwell on the tile for around ten minutes before being worked into the Tile and Grout using a rotary machine fitted with a black pad. The dirty solution was removed using a wet vacuum and the whole floor rinsed down three times to ensure there was no trace of cleaner left on the floor. It’s a large tiled area so it took the whole day to complete.

Sealing Victorian Tiles

I returned the next day to see that the floor had dried off overnight and so started to seal it using Tile Doctor Seal & Go which is a topical sealer that adds a nice shine to the tiles, five coats of sealer were needed before the tiles were fully sealed. I think you would agree the floor now looks fantastic; certainly the client was happy with the finish.

Victorian Tiles at Salford Town hall after

 
 
Source: Commercial Tile, Stone and Grout Cleaning in Greater Manchester

Cleaning Travertine tiles at a University

This rather dirty Travertine tiled floor is located in the reception area of the hotel and conference centre of the Cranfield University, apparently the tiles had been laid ten years prior and had not been properly cleaned and resealed since.

Cleaning Tumbled Travertine Tiles

Before starting we covered all the area around the floor with masking tape and plastic sheeting to protect it from any splashing which can happen when you’re using high speed floor machines.

The tiles were in need of a good deep clean so a strong dilution of Tile Doctor Pro-Clean was applied to the floor and left to soak into the tile for twenty minutes before being scrubbed in with a using a rotary machine fitted with a scrubbing pad. The soiled solution was rinsed off using clean water and extracted using a wet vacuum repeating the process until you could see the improvement in the floor. A stiff hand brush was also used along the grout lines with more Pro-Clean to get them clean.

Travertine Tiles Before Cleaning at Cranfield University Travertine Tiles After Cleaning at Cranfield University

Burnishing Travertine Tiles

To restore the shine back to the travertine we used a set of diamond encrusted burnishing pads starting with a coarse pad and a little water fitted to a heavy rotary machine, the coarse pad strips off any remaining dirt and seal from the floor, the resulting slurry was then removed using a wet vacuum.

Once finished with the course pad we moved on to the medium and fine pads again with a little water until the floor was polished. The final “Very Fine” pad brings up the polish on the floor and buffs it to a nice shine.

Sealing Travertine Tiles

Last step was to seal the tiles which would prevent any dirt getting trapped in the pores making it easy to clean and ensuring it keeps it appearance for longer. For this we used two coats of Tile Doctor Colour Grow which as well as sealing the tiles works to bring out the natural colours in the stone.

The customer was very happy with the results and commented that they thought the transformation was amazing.
 
 
Source: Commercial Travertine Tile Cleaning in Bedfordshire

Polishing a Terrazzo School floors

This Terrazzo Floor was at the entrance to a School in Kilmacolm where as you can see from the photograph below had come under some heavy use and was now proving difficult to keep clean. We were asked to give it a deep clean, polish and re-seal therefore making it much easier to maintain going forward.

School Terrazzo Floor Kilmacolm before cleaning

Cleaning a Slate Floor

Hard stone surfaces such as Terrazzo have to be burnished to get the shine back and this process basically involves cutting back the surface with a set of diamond encrusted burnishing pads.

Before burnishing however the floor was swept out to remove any loose debris that could get caught under the pads and scratch the floor. Once that was done a Coarse 400 grit burnishing pad was fitted to our heavy rotary machine and run over the surface with a little water to help lubricate the process, the coarse pad removes surface dirt and coatings such as sealers. Once that was finished we moved onto the medium 800 grit pad which is the first step of the polishing process and also removed ingrained dirt. The surface of the Terrazzo is still quite rough at this stage so once complete with the medium pad the fine (1,500 grit) is used smooth down the surface and continue to build up the polish in the floor. The last pad is a very fine (3,000 grit pad) and this pad builds on the existing polished effect to create a high shine finish.

All these pads are applied with water and the resultant slurry needs to be cleaned off during the process with the final step of giving the floor a thorough rinse with clean water, I can recommend a wet vacuum at this point as it makes light work of removing liquids from floors.

Sealing a Terrazzo Floor

Once the floor was completely dry it was sealed using two coats of Tile Doctor Colour Grow which is a great product to use of these characteristic floors as it brings out the colour in the floor as well as providing on-going stain protection. The floor was then buffed using a white buffing pad to bring up the shine further; needless to say our client was extremely happy with the finished result.

School Terrazzo Floor Kilmacolm after cleaning

 
 
Source: Commercial floor cleaning services in Glasgow