Shown below is a video clip for a job we did recently restoring 150 year old Quarry Tiles at a School near Peterborough in Northamptonshire. The school had a lot of problems with this floor over the years and had called in another cleaning company several months prior but found that within weeks the sealant they had applied had started to bubble and peal off. The floor was suffering from ongoing dampness problems in some areas, which isn’t unusual for a floor in an old building as damp proofing is a relatively modern concept. Tile Doctor was called in to try to rectify the issues.

Cleaning Quarry Tiles

The work was booked to be carried out before Xmas and we spent hours stripping the tiles with Tile Doctor Pro-Clean agitated with a buffing machine fitted with a black scrubbing pad with little affect. To resolve the problem we resorted to getting down on hands and knees with a steamer and scrapper and spend the next 3 days taking off several coats of sealant and wax stripping quarry tile floor. The floors were then allowed to dry for ten days over Christmas.

Sealing Quarry Tiles

We returned in the New Year and took damp meter readings from the floor to ensure it was dry before sealing. The choice of sealer was vital given the floor was 150 years old and it was essential we chose one that was breathable to ensure any dampness could permeate up through the floor and not get trapped causing a problem. We settled for Tile Doctor Colour Grow which is breathable and offers good stain protection as well as enhancing the colour in the tile, two coats were sufficient to ensure to seal the floor. The last step was to buff the floor with a rotary machine fitted with a white pad to bring out the shine.

Quarry Tile Maintenance

The school had faced problems maintaining this floor in the past so I returned to site the following week to explain the best method for cleaning the floor going forward; this essentially involves using two buckets, once containing cleaning solution and another to rinse out the mop, I also gave them a complimentary bottle of Tile Doctor Neutral cleanerand a white buffing pad to point them in the right direction. Neutral Cleaner is a PH Neutral formula which unlike most acid products will not degrade the sealer over time.
 
 
Source: Cleaning and Sealing old Quarry Tiles at a school in Oundle, Northamptonshire

We were asked to visit a prestige car showroom near Weybridge in surrey to see what could be done to improve the appearance of the Porcelain Tiles in the showroom. As well as foot traffic the floor also had to cope with the rubber from car tyres; naturally they had been cleaning the floor regularly themselves but were not happy with the results.

Cleaning Porcelain Tiles

Porcelain is quite a durable material that likes ceramics don’t usually need a sealer so we prescribed a Deep Clean was in order and set about scrubbing the floor using Tile Doctor Pro-Clean which is a strong alkaline cleaning product specially designed for use on Tile, Stone and Grout where acidic cleaners can cause damage. The solution was scrubbed in using a rotary machine fitted with a black scrubbing pad and then thoroughly rinsed down. I should point out a wet vacuum machine comes in very handy here for removing the liquids from the floor. When it had dried I buffed it up using a white buffing pad.

It’s difficult to see the improvement from the photographs but I can tell you the owner was really pleased with the result as were some customers who came in when we were finishing up.

 
 
Source: Car Showroom Tiles Cleaned in Weybridge, Surrey

This Quarry Tile floor was found under carpeting at a school in Leatherhead, Surrey during a refurbishment; you can see from the photograph what a terrible state it was in however the school was keen to keep the tiles and we were brought in to restore them.

Cleaning Quarry Tiles

There was a lot of dirt on the tiles so a strong solution of Tile Doctor Pro-Clean was applied to the floor and left to soak in for around 20 minutes; Pro-Clean is a multipurpose alkaline cleaning product designed specifically for cleaning tile and stone. The floor was then scrubbed using a rotary machine fitted with a black scrubbing pad and then thoroughly rinsed with water which was removed using a wet vacuum. Once the Quarry tiles were dry it was possible to spot the areas in need of further attention and these were scrubbed by hand together with more Pro-Clean.

Sealing Quarry Tiles

Once happy with the floor it was left to dry off overnight and we came back the next day to seal it with six coats of Tile Doctor Seal and Go which will provide future surface stain protection and also leaves a nice deep low sheen. The builders working on the refurbishment couldn’t believe the finish, I must admit looking at the photographs it was quite a transformation.

 
 
Source: Leatherhead School Quarry Tiles Restored

I was asked by a building company to look at some slate flooring that was laid during a refurbishment to the offices of a German television station based in central London.
The architect was not happy because there appeared to be some grout haze and some grout along the ridges that you get in slate. I carried out a demonstration to the building manager and she was pleased with the result and we were awarded the job.

Because of the nature of the business I had to do the job out of hours, which suited me because there were 4 toilet areas to do over 6 floors and I was able to get on with the job without any interruption.

Slate Tile Cleaning

On my arrival I laid a coating of Tile Doctor Remove and Go mixed 50/50 with NanoTech Ultra-Clean to 2 toilets and left it to dwell while I brought all my equipment in and set up. These two products together create a very powerful stripper cleaning solution ideal for the job in hand. I left the products to soak into the tiled slate floor of the first toilet for an hour before scrubbing it in using water and a hand scrubbing brush. The soiled solution was then removed using a wet vacuum and then rinsed and sprayed with Tile Doctor Grout Clean-Up to remove any remaining grout haze off the surface of the tile. The slate was the given two mores rinses with clean water before being left to dry.

Before starting on the next floor I left a mixture of Remove and Go and NanoTech Ultra-Clean to dwell on the next floor. I then carried on with this process described above until all the floors were cleaned.

Slate Tile Sealing

Once the floors were dry I put a single coat of Tile Doctor Colour Grow sealer down on each floor which is a sealer which really brings out the natural colour of the stone.
The client had requested a shiny final finish so the sealing was completed using two coats of Tile Doctor Seal and Go on each floor.

When I had finished the site manager said that he couldn’t believe how nice they had come out and was looking forward to the reaction of the clients.
 
Source: Cleaning and Sealing Slate Tiles in Central London

Polished Porcelain is very hard wearing and looks great in the retail environment; it does however get very slippery when wet and given the increase in accident claims in the UK and companies happy to pursue them it can be a real problem. Prevention with an Anti-Slip solution is definitely cheaper than a court case and this is the very problem we were asked to address at a shop in Leeds recently.

Applying Anti-Slip to Polished Porcelain Tiles

This floor in a retail outlet in Leeds was laid with white Polished Porcelain tiles and the retailer was keen to prevent accidents happening to their customers. First we treated the area with Anti-slip cleaner to make sure the floor was free from dust and dirt contaminants before the Anti-slip solution was applied.

We then applied Tile Doctor Anti-Slip with a spray pump bottle and lightly scrubbed this in, left it on the floor area for the correct time duration and then applied the bonding agent on top of this.

The last step was to buff the floor with a black buffing pad attached to our Victor floor buffer; afterwards we rinsed the floor with water and removed the water using a wet and dry Vax machine.

The effects of Anti-slip work as soon as the floor has been buffed, rinsed off and left to dry, the customer was very happy with the results and left the following message for us.

Just wanted to thank you for sorting an anti-slip treatment for the new porcelain tiles in our Leeds store. The treatment definitely works,(as we found out the first time it rained!!), and the whole process was dealt with efficiently and promptly.
Val Caine (Director).Wish, Bond Street, Leeds.

 
Source: Anti-Slip Treatment on Polished Porcelain at Leeds Retailer

Applying Anti-Slip treatment to Polished Porcelian